|
|
 |
|
|
 |
|
|
|
|
|
DROP TEST
Units were loaded with weights (see list below) and
dropped at different angles from a 6’-10” platform onto
a concrete surface. Cases maintained their watertight
integrity and remained closed. A small percentage (<10%)
sustained broken tall rib. Tests were successful.
| UNIT |
WEIGHT |
| 120 |
2.0 lbs |
| 300 |
4.9 lbs |
| 520 |
15.7 lbs |
| 710 |
20.0 lbs |
| 720 |
35.0 lbs |
WATERTIGHT INTEGRITY
TEST
MIL-STD 810F 512.4 and Ingress Protection Codes 6,7.
IMPACT TEST
This test was
performed by dropping a 4.5 lb cylindrical piece of
steel onto the centre of the top and then onto the
bottom of each case from a height of 6’.
The test was performed three times on each
surface. No material failure or cracks were found.
HANDLE TEST
Repetitive Impact Test
15 lbs of weight was added to each case. Cases were
then hung by their handle and given “jolt” tests. Every
6 seconds, for 48 hours the cycle machine lifted and
dropped each case. Neither the handle, the handle pin
nor the case itself showed any signs of stress.
Weight Test
Cases were loaded with 75 lbs of steel, and hung by
their handle for 60 hours. No stress marks were found in
handle, pin, latches, hinges or any component of the
case.
UV COLOUR AND
MATERIAL PROTECTION
All materials used in the manufacture of our cases
are UV resistant and UV stabilized.
CERTIFICATES
United States Department Of Defence Cage Code number
1XCY9.
MIL-STD 810F 512.4 IP 6,7.
|
|
